Build a PC: If you come up with the decision for a new PC configure, you will need to have a clear understanding of the steps to follow. On top of that, you should also be aware of the best practices to follow as well. This will help you to get the maximum returns out of the time and effort you spend to PC Konfigurator. Here are few such prominent best practices that you should adhere to.
Installing the processor
The process of installing a processor is relatively straightforward. You don’t need to use any special tools to complete the job. However, it is important to make sure that the socket on the motherboard is clean and doesn’t contain any dust. Then you can ensure that the processor can be seated properly within the socket.
At the time of installing the processor, you should be careful not to bend the pins. You will not be able to find pins in the latest Intel processors, but you can still see them in AMD processors. You should grab the processor from its sides and proceed with the installation. While you do it, double-check, and make sure that there aren’t any bent pins. All the pins should align properly with the motherboard slot.
Never forget heatsinks
You will need to install heat sinks or coolers on top of the CPU as well. We often see how beginners to Assemble PC, The most common mistake they make is to use very little or too much heatsink. You will need to understand the right amount of heatsink that you should be using on top of the CPU. It should be in a position to create a thin layer in between the processor and the fan. The surface on top of your CPU should be clean and the heatsink should make perfect contact with it. The CPU heats up quickly. Thus, a good CPU coolers is a must
Installing the motherboard
The process you have to follow in order to install the motherboard can be quite tedious. However, it is important to stick to the correct steps when you are assembling the motherboard for the very first time. Otherwise, fixing an issue with the motherboard can lead you to frustration.
Before you place the motherboard inside the casing, you will need to install the I/O shield. You should also mount the cooler and CPU to the motherboard. Then you will not have to go through any challenges after placing the motherboard inside the casing.
At the time of installing the motherboard, you might notice that your casing is having brass standoffs. Brass is a soft material. Therefore, you will be able to easily stripe the threads. You will need to use the right amount of pressure to get the job done. It is possible to do it with your hands. Likewise, you should be extra careful while you install the screws as well. Make sure that you don’t strip the threads when placing the motherboard.
Installing RAM
Installing RAM is a straightforward process as well. You can do it before assembling the motherboard inside the casing or after assembling the motherboard. However, it is important to take a look at the motherboard manual and ensure that you are using the correct memory slots. There can be different types of memory slots in your motherboard. You will need to install RAM in the correct memory slots so that you can secure multi-channel operation.
Even if you don’t install RAM cards in the correct slots, your computer would boot. However, you will not be able to get the maximum performance out of RAM slots.
It is better to take a look at the height of RAM sticks as well. Some of the high-performance RAM sticks available in the market are relatively tall. Therefore, you will not be able to place them inside the casing. It is better if you can take a look at the height of RAM slots that you wish to install and get a spacious casing accordingly.
Installing the graphics cards
It is true that you will only have to go through a straightforward process to install the graphics cards. However, there are some important things that you will need to keep in mind. The latest graphics cards available out there in the market can be installed on the PCI Express x16 slot. Your motherboard manual might refer to this as a PEG slot.
There can be multiple PEG slots within your motherboard. It is better to install the graphics card in the uppermost slot out of them. Then you can receive utmost performance at the end of the day.
If you are getting a high-end graphics card, you will need to have supplemental power connections as well. In such a situation, you should be using an appropriate power supply, which can support the capacity of the graphics cards. You will also need to connect the supplemental power leads before you turn on your computer.
Installing the storage drivers
You should take a look at the size of your casing before you install storage drives. If the hard drive gets into the cage in a perpendicular direction to the motherboard tray, it is good to have the connectors face the rear side of the system. This will help you with proper cable management because you can allow the cables to run behind the computer motherboard try. In case if the hard drive is installed in parallel to the motherboard, you will need to locate a proper place to install the hard drive, so that you can make sure that it doesn’t encroach on any expansion card that you have in your computer. This is a problem that you will have to deal with when using a smaller casing.
These are some of the best practices that you can adhere to while you are PC Zusammenstellen. If you can adhere to these steps, you will never come across any problems, even if you want to troubleshoot an issue in the future. On top of that, these best practices can help you to get the maximum returns out of your PC.